Who Can Install Electric Gates?

Posted by Steve Jones 06/04/2017 5 Comment(s) Gate Automation Safety,Gate Automation,

Who is qualified to install electric gates


Who Can Install Electric gates?


The world of electric gate automation and installation is not regulated. Anyone can legally install electric gates. But when they are not installed correctly, electric gates can be lethal. So who should install your electric gates?


DIY Electric Gate Installation


Some electric gate kits are advertised as DIY, implying that the competent homeowner can install them. MHouse and Life Gate Automation both supply electric gate kits that are high quality but also relatively simple to install and program.

But even trade installers with some of the necessary experience don’t necessarily understand the safety requirements. Electricians are qualified to work with electricity. Landscape Gardeners understand how to prepare groundwork and build foundations and brick pillars. And security system or burglar alarm engineers wire up and install multiple components to make a complete system just like an electric gate system.


Gate motors badly installedBut none of them work with the specific safety issues faced by the electric gate installer.


So, should electric gate kit installations be carried out by someone who is not a professional installer?


How Easy Is It To Install Safe Electric Gates?


A qualified electric gate installer will carry out a safety audit prior to designing an electric gate system.

They will want to know the size and weight of the gates.

This helps determine how much force is required to move the gates.

They will want to know how frequently the gates are likely to be used.

This will play an important part in selecting appropriate gate motors.

They will need to know that an installed swing gate moves freely on its hinges and a sliding gate runs cleanly along its track.

This ensures that the geometry and hardware are all OK before motor installation.


They will also want to know about the environment in which the gates will operate.


This will include:

Cable joins in an underground foundation box are NOT recommended

Exposure to wind

Proximity (as they open and close) to traffic and pedestrians not using the gates, as well as vehicles and people passing through open gates

Rising or falling ground level in the path of moving gates

Drainage (for underground systems)

Potential crushing, pinching, shearing and impact points created by moving gates…

…and many more potential and real issues.


What Does Make Electric Gates Safer?


Very briefly, gates should be made safer, firstly by physically preventing access to dangerous and potentially dangerous points.

Secondly, electronic safety devices, that affect gate movement without contact with the gates, should be installed. These predominantly include photocells.


For anywhere not covered by photocells, safety edges and gate motors with obstacle detection are recommended. These will stop and reverse a gate if it comes into contact with something or someone.


Underground gate motor cable joins should be above groundWhat’s The Best Approach?


Gates and electric gate kits are not cheap and it makes no sense to cut corners to have unsafe gates installed to ‘protect’ your family.

At Linkcare, we don’t encourage homeowners to install their own electric gates.

We also strongly recommend that other professional trade installers considering installing electric gate systems study the relevant safety advice. Electricians, landscapers and security installers should also get as much training as they can from the manufacturers whose systems they will install.


Experienced and qualified electric gate installation engineers will always be the best route to safe electric gates.

If you have any questions or are looking for a suitable gate engineer where you live, call Linkcare on 01895232626.

5 Comment(s)

Louise Montague-Fuller:
19/06/2019, 11:22:26 AM

I already have gates in place and electric motor equipment but need someone to install the motors and photocells. Live in Malvern.

Gill henderson:
14/06/2018, 11:23:16 AM

I already have gates in place. Need someone to install the equipment to move them. I live in Berwick upon tweed. Is there any local installers in area. Thankyou Gill Henderson.

Raymond Trevor:
21/06/2018, 05:56:26 PM

i am thinking of having electric gates fitted within the next 3 months on my property and would like a quote please

Gareth Purslow:
17/11/2018, 03:30:41 PM

Already have Allmatic plus mechanism. Need someone to fit and set up

TPS Electric Gates:
11/02/2020, 06:18:07 AM

This is great article.It really gives me great insight about gate automation and who can install electric gates. Thank you for sharing.

Leave a Comment