Your shopping cart is empty!
Your shopping cart is empty!
Automated gates are becoming increasingly popular for both businesses and homes because of the reassurance and security they can offer. Meanwhile, automated gate systems can be installed with a large range of access control systems which control and monitor entrances in a range of different types and frequencies.
Remote control gates are made from a collection of individual components that creates a new piece of machinery . The parts involved to make a remote-control gate include a motor to move the gate, a safety device which stops them causing any kind of damage or injury to someone, and a mechanism that responds to an open or close command from a transmitter.
When requesting a gate to open and close, the most common method is using a remote control, also known as a transmitter. Remote controls are often small enough to fit in a pocket or handbag and open or close the gate at the push of a button. The same remote control could also be used to open your garage door or other automated entrance.
So, how does this open the gate?
The transmitter sends a signal to a receiver which passes that command to open or close the gate to the control panel. There are only two radio frequencies that are permitted for use for remote control gates in the UK, . These are 433MHz or 868MHz. The transmitter and receiver have to use the same frequency to be able to communicate with each other.
It’s also important to note that each remote may have a different coding system such as a fixed code or a rolling code, which means the codes have to match up with receiver for the command to be able to work. Electric gates always use electronic motors to move the gate, and they may operate an hydraulic system or an electromechanical system. The gate design will determine how it operates. Sliding gates run on wheels at the bottom of an entrance, they are driven by a static motor with a cog on its output shaft that meshes with a toothed rack running the length of the gate. Swing gates rotate around hinges located on gate pillars at the sides of an entrance and can use a variety of methods to ‘swing’ the gate open these could be hydraulic or electromechanical rams, underground motors or arm motors.
Electric gates are strong and can cause injury if they are not prevented from coming into contact with anything or anyone who isn’t expecting it.
However, there are many safety devices that can be included in an electric gate system. These include photocells which send a beam of invisible light from one to another. The pair of photocells are placed on either side of a potential fdanger zone. When the gates are moving, anyone passing through the beam of light into the danger zone, breaks the beam and gates are instructed to stop moving.
Other physical safety features include safety edges that are added to the points on the gate that can come into contact with anyone who gets close to moving gates. The edges cushion the blow, and immediately send a signal to the gate control panel telling it to stop and reverse to prevent any further injury or damage.
Find out if magnetic locks are secure here.
LinkCare offers a variety of products that provide the best in electric gates, gate remotes and other accessories. We are here to answer any questions you may have and are also able to recommend trusted companies for gate installation and maintenance across the UK. Contact us on 01895 232626 or visit our website for more information.
These cookies are required for the website to run and cannot be switched off. Such cookie are only set in response to actions made by you such as language, currency, login session, privacy preferences. You can set your browser to block these cookies but our site may not work then.
These cookies are usually set by our marketing and advertising partners. They may be used by them to build a profile of your interest and later show you relevant ads. If you do not allow these cookies you will not experience targeted ads for your interests.
These cookies allow us to measure visitors traffic and see traffic sources by collecting information in data sets. They also help us understand which products and actions are more popular than others.
I want gate remote control system ,plz tell the details ,of cost and where is available
Hi Girish, Please email your full name address and phone number to [email protected] Please include details of which gate remote you would like
I want a simple circuit board to for remote operating the gate
Hi, Please call us on +44 1895232626 or email us at [email protected] with more details about your request, so that we can identify the correct item for you
Require quote for a swing gate system for a gate to a villa complex. The gate is a moderate sized one. Also, if you have literature on the working of a swing gate system and its features, advantages of such a system, it would be good
Hi, I have motorised gates, control panel and a safe 240v supply. The previous owner of my property used a push button on the gate pillar to work the automation. How can I fit a receiver adjacent to the panel to give a pulsed signal from a remote key fob ? I doubt there is space enough in the control panel housing to accommodate a large circuit card, so a separate housing would be a favoured proposal. Thanks Mikey
These include photocells that send a beam of invisible light from one to another. The pair of photocells are placed on either side of a potential danger zone.
How can I make my electric gate work from my phone
Leave a Comment